, Workflow 
 BLS-8L wet kiln dust removal equipment from the main tower, gray-water separator and auxiliary equipment, pumps, fans, electric control console and other components, connected by pipeline continued to form an edge dust, gray water separation, dust and water recycling complete recycling system. 

 Second, the operation mechanism 
 Two chimney shaft kiln exhaust gas in the jet-induced acceleration, respectively, cut into the dust to form a cyclone tower, due to centrifugal force, most of the dust Shuaixiang inside and outside the water film to capture the wall is complete the first level division; flow continues increase in the process of rotation, the spray washing, complete the second stage dust. In addition, under the ash-water mixture into the gray water separator for separation, by enrichment of the gray water from the separator to the bottom row of pull scraper conveyor, and then stir into the raw material into a ball, to achieve recycling. Was to clarify the water outflow from the upper to the middle of the separator tank and then pump into the dust by the tower, the circular arrangement of the nozzle to form water film, to achieve water recycling. All the equipment in electrical control console control for safe operation of the electronic control system uses the parts necessary for sound and light alarm. 

 Third, the main structure and working principle of the device 
 Dust outside the tower and the tower by the Vice-towers are manufactured using stainless steel. Outer diameters of 2.4m, high-12.7m. Vice tower diameter 0.5m, located in the central tower, spray washing with eight swirl nozzle ring arranged along the outside of the lower tower. Gray-water separator for the manufacture of ordinary steel, inner wall of "TO" effective diameter of resin corrosion 2.8m, full-height 4.3m, with the central gear to affect the use of the mud unit, set the deposition of mud plaster arm scraping the Plowshare Center the discharge. When the mud arm for some reason to live, they can stop the run, and audible alarm, after treatment, recovery is still not running, the application of industrial cleaning. Arm stuck in the mud is not mud or prolonged power outages caused by power outages longer, more serious failure, thus requiring the user is equipped with dual power