SDAP Series multi-position thin cylinder pneumatic system conditions of use 
 Pneumatic system and the use and maintenance of technical conditions 
 First, the technical conditions for the use of cylinder 
 1 cylinder using pressure 
 Using the cylinder pressure is the lowest to the highest use of pressure using the pressure range. 
 Cylinder working pressure is generally 0.15 ~ 1MPa 
 2. Pressure resistance 
 Resistance to the maximum cylinder pressure defined as 1.5 times the working pressure. Experiments under pressure in pressure, holding pressure 1min, should ensure that the joints do not loose parts without permanent deformation or other anomalies. 
 3. Ambient temperature and medium temperature 
 Into the cylinder gas temperature is called the medium temperature. Workplace in which the temperature of the cylinder as the ambient temperature. 
 Under normal circumstances, the ambient temperature and medium temperature of 5 ~ 70 ℃. 
 Cylinder sealing material will soften at high temperatures, low temperatures hardening embrittlement, will affect the sealing performance. High temperature with high temperature Viton seals. 
 4 Durability 
 Under normal circumstances, the durability of the cylinder target of not less than 3000km. The durability of the cylinder and cylinder actual use of the state, the piston speed, lubrication, and many other factors. 
 5 cylinder speed 
 The use of standard cylinder speed range most of the 50 ~ 500mm / s 
 6 cylinder theoretical output power 
 The theoretical output power of the cylinder is the cylinder in a stationary state, the use of pressure in the effective area of ??the piston to generate thrust or tension, the actual output power is transmitted mechanical force on the piston rod. 
 7. Cylinder stroke 
 According to the operation of the cylinder and the transmission distance compared to pre-stroke cylinder stroke. For ease of installation, the journey should be appropriate to calculate the margin. 
 8 Select the cylinder varieties 
 According to the cylinder in this task requires to select the cylinder varieties. Such as requiring the cylinder reaches end of travel without the impact of the phenomenon and impact noise, the buffer should be selected cylinder; such as requiring light weight, you should choose light cylinder; narrow installation space requirements and a short trip, choose thin cylinder; a lateral load, optional with guide cylinder; requires high precision braking, locking cylinders, etc. should be selected. 
 9. Valve and cylinder matching: 
 Pneumatic technology is compressed air as working medium for energy and signal transmission technology, under normal circumstances, the cylinder piston speed up to maximum 1m / s, the actual use to select the best speed (50 ~ 500mm / s), rather than the maximum speed recommended valve and cylinder matching as follows: 
 Bore 3,240,506,380,100,125,160 200 250 320 400